Choosing the right lubricant for gears
Is it important to lubricate gears? why?
Gear or Heavy-duty gears, have been a widespread method of power transmission for any machineries. It one of the most economical types of gear drive alternatives in major applications where both a high load-carrying capacity and a long service life under high loads are required.
Lubricant is needed where there is a sliding between contacting gear teeth in any industrial machineries.
Sliding occurs most actively when the teeth first come into contact. As they become disengaged, the points of the respective elements develop a small amount of scraping action on the sides of the adjacent teeth.
Both a wiping action and a squeezing can occur at this phase. As the teeth become more engaged, rolling contact becomes more pronounced. Wiping or scraping–off of the lubricant is less probable to occur under these conditions, but the squeezing-out still is possible, especially since maximum contact pressures are encountered during the time the teeth are so engaged.
Moreover, wear will occur more rapidly at the points and roots of the teeth due to the sliding friction involved, whereas the intermediate teeth surface adjacent to the pitch line, being subjected to rolling action, will resist wear more effectively.
It is also worth mentioning that, due to the low speeds, the very high torques to be transmitted, as well as the barely attainable hydrodynamic conditions, the tooth flanks of gear drives are at a serious risk of damage.
Furthermore, surface deformations tied to severe temperatures and loads, inaccuracies in adjustment of pieces within the mechanism, insufficient lubricant supply, or even a poor selection of the lubricant, can often lead to the same results. The choice of a proper lubricant is essential.
Parameters to be considered when choosing a proper lubricant?
- Excellent adhesion properties
- High resistance to water washout and spray-off
- High load-carrying capacity, protecting against wear and friction
- Wear and corrosion protection
- Noise and vibration reduction properties
- Sprayability and/or ease of dispensability
- Additional properties, such as drainability, or resistance to fling-off
Available lubricant options for gears in the market?
Currently, both pastes and greases offer the best solutions to the most common problems encountered in this kind of application.
Pastes contain medium-to-high viscosity mineral base or synthetic oils. Also it may contain a thickener, solid lubricants (such as MoS2 or graphite), rust inhibitors, and extreme pressure agents. Where, extreme pressure agents prevent welding of metal surfaces. Furthermore, pastes produce a thick, semi-dry working film separating the gears during mesh, which does not buildup in the roots of the gears unless it encounters high-temperature conditions.
In addition, the paste can be used in moderately dirty and dusty environment without fear of forming abrasive compounds. Greases, on the other hand, are sometimes preferred when high-temperature conditions prevail, or where leakage of a thinner lubricant might contaminate materials being processed.
